/*
 * This example shows how read arcade buttons and PWM the LEDs on the Adafruit Arcade QT!
 */

#include "Adafruit_seesaw.h"
#include <seesaw_neopixel.h>

#define  DEFAULT_I2C_ADDR 0x3A

#define  SWITCH1  18  // PA01
#define  SWITCH2  19 // PA02
#define  SWITCH3  20 // PA03
#define  SWITCH4  2 // PA06
#define  PWM1  12  // PC00
#define  PWM2  13 // PC01
#define  PWM3  0 // PA04
#define  PWM4  1 // PA05


Adafruit_seesaw ss;

void setup() {
  Serial.begin(115200);
  
  while (!Serial) delay(10);   // wait until serial port is opened

  Serial.println(F("Adafruit PID 5296 I2C QT 4x LED Arcade Buttons test!"));
  
  if (!ss.begin(DEFAULT_I2C_ADDR)) {
    Serial.println(F("seesaw not found!"));
    while(1) delay(10);
  }

  uint16_t pid;
  uint8_t year, mon, day;
  
  ss.getProdDatecode(&pid, &year, &mon, &day);
  Serial.print("seesaw found PID: ");
  Serial.print(pid);
  Serial.print(" datecode: ");
  Serial.print(2000+year); Serial.print("/"); 
  Serial.print(mon); Serial.print("/"); 
  Serial.println(day);

  if (pid != 5296) {
    Serial.println(F("Wrong seesaw PID"));
    while (1) delay(10);
  }

  Serial.println(F("seesaw started OK!"));
  ss.pinMode(SWITCH1, INPUT_PULLUP);
  ss.pinMode(SWITCH2, INPUT_PULLUP);
  ss.pinMode(SWITCH3, INPUT_PULLUP);
  ss.pinMode(SWITCH4, INPUT_PULLUP);
  ss.analogWrite(PWM1, 127);
  ss.analogWrite(PWM2, 127);
  ss.analogWrite(PWM3, 127);
  ss.analogWrite(PWM4, 127);
}

uint8_t incr = 0;

void loop() {
  if (! ss.digitalRead(SWITCH1)) {
    Serial.println("Switch 1 pressed");
    ss.analogWrite(PWM1, incr);
    incr += 5;
  } else {
    ss.analogWrite(PWM1, 0);
  }
  
  if (! ss.digitalRead(SWITCH2)) {
    Serial.println("Switch 2 pressed");
    ss.analogWrite(PWM2, incr);
    incr += 5;
  } else {
    ss.analogWrite(PWM2, 0);
  }
  
  if (! ss.digitalRead(SWITCH3)) {
    Serial.println("Switch 3 pressed");
    ss.analogWrite(PWM3, incr);
    incr += 5;
  } else {
    ss.analogWrite(PWM3, 0);
  }
  
  if (! ss.digitalRead(SWITCH4)) {
    Serial.println("Switch 4 pressed");
    ss.analogWrite(PWM4, incr);
    incr += 5;
  } else {
    ss.analogWrite(PWM4, 0);
  }
  delay(10);
}