#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SH110X.h>

#define i2c_Address 0x3C // Change this if your OLED has a different I2C address
#define SCREEN_WIDTH 128
#define SCREEN_HEIGHT 64
#define OLED_RESET -1

Adafruit_SH1106G display = Adafruit_SH1106G(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);

void setup() {
  Serial.begin(9600);

  if(!display.begin(i2c_Address)) {
    Serial.println(F("SH110X allocation failed"));
    for(;;);
  }

  display.display();
  delay(2000);
  display.clearDisplay();
}

void loop() {
    display.clearDisplay();

    display.setTextSize(1);
    display.setTextColor(SH110X_WHITE);

    // Display temperature on the screen in Celsius with one decimal place
    display.setCursor(10, 10);
    display.print("Temp:");
    display.setCursor(40, 10);
    display.print("-127.00"); // Display one decimal place

    display.setCursor(10, 20);
    display.print("Fan%:");
    display.setCursor(40, 20);
    display.print("44");

    // Update the display
    display.display();
}